Pyrosleeve® "RF" (Retrofit) fire collars are manufactured from a steel casing to house the intumescent material which is activated in the event of fire, crushing the plastic pipe and sealing against the passage of flame and hot gases. The intumescent material is unaffected by water or atmospheric influences and industrial environments and is also resistant to dilute acids, alkalis, paints and conventional construction materials, such as gypsum, lime, cement and adhesives. Pyrosleeve "RF" fire collars are designed to provide a two hour fire rating with existing plastic pipework. Application Suitable for use in fire rating plastic pipes passing through walls and floors in: • High rise construction • Flats, townhouses and apartments • Civil projects • Health care and aged care facilities Fire Test Data Pyrosleeve® "RF" fire collars have been tested and approved to AS 1530 part 4, 1997 and AS 4072 part 1, 1992 can achieve a two (2) hour fire resistance rating. NB. Four (4) hour application is available, contact Pyropanel or your nearest Pyropanel distributor. Product Warranty All Pyrosleeve® "RF" fire collars have a ten (10) year product warranty on the intumescent material contained in the collar. Pyrosleeve® 'RF' Features • Quick and easy to install • Low height of collar ensures maximum clearance for pipe elbows or fittings. • A cost effective fire stopping solution. • 10 year warranty on intumescent material. • Australian made. Table of Sizes 'RF' Size (mm) To suit Nom. Pipe (mm) Actual Pipe O.D. (mm) Collar Opening (mm) Collar Length (mm) Collar Dia. (mm) No. of Fixing Tabs 32 - 50 32 - 50 36 - 56 64 32 82 2 65 - 100 65 - 100 69 - 110 126 43 158 4 * 150 150 160 165 60 205 4 Pyrosleeve RF150 Fire Collar The Pyrosleeve RF150 fire collar is manufactured from a steel casing to house the intumescent material which is activated in the event of a fire, crushing the pipe and sealing against the passage of flame and hot gases. It is unaffected by water or atmospheric influences and industrial environments and is also resistant to dilute acids, alkalis, paints and conventional construction materials, such as gypsum, lime, cement and adhesives. The Pyrosleeve RF150 can achieve up to a four-hour fire rating, and is fully tested and approved for use on uPVC, Polyethylene, Polypropylene, HDPE and ABS pipes. To install, wrap it around the pipe and secure by interlocking the two tabs through the slots on the collar and bending them over with multigrips. Fix to anchoring surface using masonry anchors or metal spikes. FLOOR (Surface Mounted) Installation WALL (Surface Mounted) 1. Attach fixing tabs to collar. 2. Open Pyrosleeve "RF" fire collar and wrap around pipe. 3. Lock collar in place using inbuilt clip. 4. Push Pyrosleeve "RF" collar to anchoring surface. Using a masonry drill bit, drill holes though fixing tabs. 5. Fix to surface using 5mm x 25mm metal spikes or 8mm masonry anchors, through tabs. NB: Nylon anchors or aluminium knockins are NOT approved. Download Catalogue Page (Tech Sheet) Technical Service For complete technical and further information, please contact Pyropanel on (03) 9735 5688 or your nearest Pyropanel distributor.